This great piece of innovation allows you to reuse bath water quickly, simply and without any pumping for any standard 40/41mm bath or sink waste.
- Lock the Droughtplug into the bath plug-hole by inserting it then twisting it.
- Fill a length of hose with water by suction or by fully immersing it in the bath.
- Connect the Droughtplug to your hosepipe using a standard snap lock hose connector and cover the free end of the hose with your thumb until you have placed it below the level of the Droughtplug,
- remove your thumb and the water will flow out!
Available alone or with a linking kit. If using the linking simply submerge the linking kit, with thumb over free end, hold the free end below drought plug and connect your own hose .
The linking kit includes the following two products allowing direct connection to a standard snaplock hose: